![]() ![]() I have tried 3 times to use qdsl and have failed for various reasons.Ĭonnected qDD and started auto holy Grail. Here are some of the issues I have come across. So PLEASE swap short and long pressing of the network button in the next Softwarerelease to get a quick connection to the APs default IP 192.168.1.1.Īnd I hope I can finally get all the bugs out of qdslr and get it to work. This can be used to connect over internet.Ĭall me a fool but who the f**k needs a multicast search on an Australian public-multicast IP 224.1.2.3 if there is absolutely nothing to find while the camera is connected through a local AP on 192.168.1.1 (by default!!!) at 99% of all users!? Long press – will display a dialog where you can enter the IP address of the machine running DslrDashboardServer (ddserver) or qDslrDashboard. The network communication is using 4757 TCP port. Search is done with multicast messages over 224.1.2.3:4757 (UDP). Single press – will initiate a search over your local network for DSLR cameras connected to DslrDashboardServer (ddserver) running on an OpenWrt router (like the TP-Link MR3040) or DSLR cameras connected to qDslrDashboard running on another PC or Android device. I made an update to the newest DDserver with the same problem).ĭon’t know if there are configuration items for the wireless connection… do you have any idea? ![]() Therefore, the reason must be either my connections (thru a TPLink) or the algorithm used in qdsldashboard. in helicon (on Android 4.4 connected to my d800 thru usb), the refocus works perfect (when switching from point ‘1’ to ‘2’) (helicon also works with 2 definied focus points). in qdslrdaschboard (connected to my D800 thru a TPLink), the refocus is not exact when siwtching from point ‘1’ to ‘2’ (it does not refocus exactly to the definied point) same result on ipad AIR 2 and Android 4.4 I tested the focus-switching between the 2 defined focus points: With Helicon, the focus stacking works with ALL my lenses exactly as desired. Meanwhile, I tested helicon (wired thru usb) – just to find a way thru my problem. That’s exactly the workflow I followed (with the results as described: no exact refocus when starting the focus stacking etc.). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |